Setting recommended reference values
see also interpretation of results
Mark van Kleef
Last Update 2 months ago
| Analyte | Unit | Reference Value Minimum | Reference Value Maximum |
| ALB | g/L | 30 | 43 |
| AST | U/L | 61 | 103 |
| BHB | mmol/L | 0,1 | 0,9 |
| BUN | mmol/L | 3,3 | 6,6 |
| Ca | mmol/L | 2,15 | 2,75 |
| CK | U/L | 40 | 180 |
| GGT | U/L | 20 | 49 |
| GLB | g/L | 31 | 47 |
| GLU | mmol/L | 3,1 | 4,1 |
| Phos | mmol/L | 1,3 | 2,4 |
| Mg | mmol/L | 0,8 | 1,3 |
| NEFA | mmol/L | 0,01 | 0,4 |
| TC | mmol/L | 2,28 | 3,43 |
| TP | g/L | 68 | 88 |
| T-Bil | umol/L | 1 | 8 |
Procedure BoviLab:
Go to Setting - analyte. Here, the unit can be selected and minimum and maximum values can be entered.
IMPORTANT:
Make sure that the correct unit is also set in BoviMemo. You can do this by clicking on the parameter in a result (Measurement Data – List). A selection menu will appear. Here, only the unit needs to be selected; the minimum and maximum values do not need to be entered.